1
2
3
4

C1-Carbon1 “Yacht Kit Plus” Promotion

From:  2.228,00 From:  1.949,00

Clear

If the shower is going to be installed on a level above the shower floor:

The shower may need to be installed on a level above the shower floor. In this case, the distance between the shower floor and where the shower will be installed should be measured.
This measurement then needs to be communicated when ordering, selecting between the various choices in the options window, in order to ensure that the base of the shower is made to size. This will guarantee that the showerhead measures the standard approximate 200cm from the shower floor.

Contents of the offer

1 Shower body

The shower is two pieces, constructed from composite fiber and covered in bi-oriented carbon fiber that has been finished in an anti-UV varnish. Invisible cold/hot water connectors with 1/4” hookups and quick connect fittings. Double function mixer (water flow and water temperature) without visible screws, replaceable filter; pressure locking installation to the shower base, no tools necessary.

2 shower arm

Made from marine grade stainless steel 316L, featuring a multiple process, manual “Nautical” mirror finish.

3 Showerhead

Large diameter (225mm), with anti-limestone anti-obstruction silicone rubber; standard connection to the shower arm.

4 Deck Support

With visible marine grade stainless steel 316L flange; 360° rotating shower body made with Delrin® DuPont™; invisible hot/cold water connectors, with 1/4″ hookups and quick connect fittings; Delrin® is an acetal homopolymer resin registered by DuPont™ that coats metals and ordinary plastic with a combination that is unique in its rigidity and resistance to traction, as well as resistance to the effects of repeated impacts, creep and fatigue, solvents, gasoline, and moisture. The surface is protected against abrasions, and possesses an optimal coefficient of friction, elasticity, and dimensional stability.

5 Deck support cover

Made from marine grade stainless steel 316L, featuring a multiple process, manual “Nautical” mirror finish.

6 C1-Bag

Practical, elegant, lightweight, and balanced, this made-to-measure bag is the ideal complement for safely storing the C1-Carbon1 shower, is fully handmade in Italy.
Externally it is made in double-lined 5-mm Sheico® neoprene, and thanks to its spongy structure, in addition to its lightweight and thermal insulation properties, this material also offers protection from vibrations and impact.
Neoprene offers effective resistance not only against mechanical stress (crushing, abrasion, tearing, etc.) and environmental conditions (heat, UV rays, rain, seawater, etc.), but also against grease and fuels.
Internally, on the side where the shower is locked into place, there is a cross-linked PE foam structure on which an additional 2-m sheet of neoprene is applied; this is where the elastic fasteners are sewn on with a Velcro closure for ensuring that all the components remain tightly in place and never come into contact with each other during transport or storage. More details on the C1-Bag product page

1
2
3
4
5
6
6

Neoprene bag for shower C1-Carbon1, with pockets for shower head and protection straps for the shower body.

Dimensions

Assembled shower: diameter 45mm, height 207cm, showerhead height 200cm, shower arm 375mm.
Disassembled dimensions: shower base with mixer and connectors 130cm (maximum length), upper shower body 93cm.

*(the shower base is produced to size depending on its installation location)